Having trouble with your air conditioning in Seattle? One of the most frustrating things that can happen on a sweaty summer day is for your air conditioner to break for an unknown reason. Sometimes a simple fix can get your unit working properly, while other times it is necessary to call in the expertise of a professional. To learn more about some of the common problems that occur with air conditioning units, keep reading.

User Error

That’s right—air conditioner units most commonly have issues because of improper use. When your air conditioner is on, make sure that all of the windows and outside doors in your house are closed. It’s also your responsibility to make sure that your air conditioning unit is properly maintained. That means keeping the air conditioning filters and coils clean to avoid premature compressor or fan failure. Finally, thoroughly read through user manual for some basic operating rules that can increase the lifetime of your air conditioning unit and prevent future problems from occurring.

Refrigerant Leaks

If your unit is low on refrigerant, it is likely that you have a refrigerant leak. Refilling your unit’s refrigerant won’t solve this problem. You’ll need to call a professional technician to repair the leak and refill the repaired system with refrigerant. That’s because it’s important that the refrigerant charge precisely matches the manufacturer’s recommendations. If it is undercharged or overcharged, your air conditioning unit won’t work as it should.

Thermostat Sensor Issues

If your unit is behaving strangely by turning on and off at random periods, cycling constantly, or varying heating and cooling options, it’s likely that there is a problem with your thermostat sensor. The thermostat sensor is located behind the control panel and works to calculate the room’s air temperature. It can become dislodged, resulting in faulty temperature measurements. Check and make sure that the sensor is in place behind—but not touching—the evaporative coil. You can adjust the position of the sensor by moving the wire that holds it in place.

Do you use an air conditioner near Seattle ? It goes without saying that you want to keep your air conditioning unit working properly for a long time to come. One of the most important things you can do to maintain the condition of your air conditioner is to change its filter.

Watch this video to learn more about the process of changing an air conditioner filter. First, turn your electric furnace switch off. Then, reach in and pull your filter out. Make sure that the filter is the proper size for your unit. Also, make sure the filter is facing the right direction. It’s important to keep the filter clean so that it doesn’t reduce the air flow of your unit. Then, replace the filter, double-checking that it is facing the right direction.

If your HVAC bills are skyrocketing from heating and cooling your home by using the air conditioner in the summer and heating in the winter, you may want to consider installing fireplace inserts near Seattle . Fireplace inserts can save you money on your energy bills as they are more energy-efficient than traditional fireplaces. While a fireplace insert is a significant initial investment, it will save you money in the long run. Keep reading for tips on choosing the best fireplace inserts for you.

Temperature Control

Just as some air conditioner units are adjusted differently, fireplace inserts have various types of temperature controls. Some inserts feature one-touch temperature adjustment to keep you comfortable with ease. Others have remote temperature control, so you can adjust the thermometer from across the room. Programmable thermostats with wall control units are also an option.

Size

You can choose your fireplace insert based on your preferences or the size of your current fireplace. Some fireplace inserts are designed to fit into small areas, while others are very large. You can find inserts that jut away from the masonry for more radiant heat, or inserts that have a less visible look by sitting inside your fireplace.

Fuel

Do you have a preference for what type of fuel your fireplace insert runs on? Pellet models run on biofuels, such as wood pellets, corn, sunflower seeds, wheat, and other natural materials. There are also smoke-free wood-burning options for those that prefer a traditional fuel source without the mess or telltale smell of a traditional furnace. Prefer not to feed the fire? You can choose an insert that runs on gas—these models are especially easy and convenient to turn on and off.

Heat Output

You can choose from a variety of heat outputs, depending on how big the room is that you are looking to heat. Most of the available options heat areas of between 1,500 and 3,000 square feet. Some inserts also include fans or convection blowers that you can adjust to get the temperature in your room just right.

If you rely on a boiler for your home’s heating needs, it is important to make sure that you maintain your unit properly. A malfunctioning or improperly maintained boiler could leave you stranded without heat while you wait for your HVAC technician to arrive. There are several steps that you can take to maintain your boiler near Seattle.

First, you should make sure to turn your boiler on at regular intervals. By using your boiler, you can help to prevent it from freezing. Along with switching your boiler on, you should also routinely check the color of the flame. Your boiler’s flame should always be blue. An orange or yellow flame could be an indication that your boiler has a repair problem. Finally, you should also clean your boiler once every month. With the help of a company that offers furnace and boiler repair in your area, you can keep your boiler running great.

Nothing beats the feeling of curling up in front of a cozy fire on a rainy Seattle day. When you are seeking the warmth and comfort of a fireplace, with none of the hassle, consider fireplace inserts. A company offering boiler and furnace repair serving Seattle will be able to help you choose a quality fireplace furnace for your home. By pairing a fireplace insert with your boiler or air conditioning system, you can rest assured that you will be able to keep your home at a comfortable temperature, all year long. To help you prepare for your installation procedure, here is a look at what you need to know about fireplace inserts.

How Fireplace Inserts Work

A fireplace insert is designed to provide you with the look and feel of a regular fire, but with none of the work. Unlike a conventional fireplace, which will require you to gather firewood and build a fire, a fireplace insert can be switched on with the push of a button. Fireplace inserts can be connected to a variety of power sources, including electrical, gas, and propane.

The Benefits of Fireplace Inserts

Fireplace inserts have many benefits to offer your home. When you install a new fireplace insert, you can enjoy a warm and cozy fire, without the mess or hassle. Additionally, fireplace inserts offer much better thermal performance. In other words, having a fireplace insert will warm up your living room or master bed room faster and more efficiently than a wood-burning fireplace.

Choosing a Fireplace Insert

There are several factors that you will need to consider when you are shopping for fireplace inserts . First, it is crucial to choose a new fireplace insert that runs on your preferred energy source. For example, if your home is already connected to a natural gas system, you may want to choose a natural gas insert. Additionally, you will also want to select a fireplace insert that matches the style and mood of your indoor space.